EMC DL3D 1500 Administrator's Manual page 114

Configuring and Managing Disk Backup
Viewing storage servers and LSUs
Editing a storage server
Deleting a storage server
114 EMC DL3D 1500 and DL3D 3000 Administrator's Guide
1. View storage servers and LSUs. See
LSUs" on page 114.
2. Edit a storage server. See
3. Delete a storage server. See
page 114.
4. Edit an LSU. "Editing an LSU" on page
5. Delete an LSU. "Deleting an LSU" on page
To view the Storage Servers page, from the OST page, click Storage
Servers. The Storage Servers page appears.
The Storage Server summary page lists the configured storage
servers on the system as well as the maximum number of OST
storage servers allowed (100), number of storage servers created, and
number of logical storage units created (LSUs).
The LSU page is used to add, edit, or delete LSUs. To view the LSU
page, from the OST page, click LSU. The LSU page appears.
To edit a storage server:
1. To access the Storage Servers page, from the OST page, click
Storage Servers. The Storage Servers page appears.
2. Click the storage server name on the Summary page or click Edit.
The Edit Storage Server page appears.
3. Edit the storage server information as desired.
Note: If you are editing a storage server, you can edit only the
Description and Enforce read-only access to this share options. You can
also edit the de-duplication settings, but you cannot disable
de-duplication once it is enabled.
4. Click Apply.
To delete a storage server:
"Viewing storage servers and
"Editing a storage server" on page
"Deleting a storage server" on
115.
115.
114.