Command Line Interface
edit vtl
Description
del vtl
Description
list mediatype
Description
178
EMC DL3D 1500 and DL3D 3000 Administrator's Guide
Syntax
syscli --add vtl --name <vtl name> --model <model name> --slots
<number of slots> --drivemodel <tape drive model> --drives <number of
drives> [--dedup <enable | disable> --startbackup <hh:mm>
--endbackup <hh:mm> ]
Edits an existing virtual tape library
The edit vtl command lets you edit an existing virtual tape library.
You must specify the name of the virtual tape library to change any
virtual tape library settings. You cannot change the name and tape
drive model of the virtual tape library.
Syntax
syscli --edit vtl --name <vtlname> [--model <modelname>] [--slots
<number_of_slots>] [--drives <number_of_drives>] [--startbackup
<hh:mm> --endbackup <hh:mm>]
Lets you delete an existing virtual tape library
The del vtl command is used to delete an existing virtual tape library.
You must specify the name of the virtual tape library. The virtual tape
library must be offline and no media should exist in it before you
delete it.
Syntax
syscli --del vtl --name <vtl name>
Lists the media types supported for a tape drive model
The list mediatype command lists the media types supported for a
given tape drive model. The drive type can be derived from the value
of the model key name of the list of available tape drive models.
Syntax
syscli --list mediatype –drive <drive type>
Output
List of media types:
Total count = 3
[mediatype = 1]
type = SDLT1
capability = RW