Del Host; List Target; List Device - EMC DL3D 1500 Administrator's Manual

del host

Description
Syntax

list target

Description
Syntax
Output

list device

Description
Syntax
Output
Deletes an existing host
The del host command lets you delete an existing host from the
available host list. To add or change the host alias of a host, you must
specify the host's WWPN. The host must be in inactive status before
you delete it.
syscli --del host --wwpn <host's world wide port name>
Lists all the targets on the system
The list target command displays the list of targets on the system. It
lists the node, alias (FC port), and the WWPN.
syscli --list target
target count = 1
target = 1
node = 1
alias = FC3
wwpn = 214108001bc08278
Lists the devices on the system
The list device command lists the devices available on the system.
The list of devices on the system includes the type of device (VMC or
VTD), serial number of the device, and the virtual tape library name
on which the device is present.
syscli --list device --name <vtlname>
device count = 3
device = 1
vtl name = MyVTL
type = VMC
serial = VL01SV0825BVA04501
device = 2
vtl name = MyVTL
Command Line Interface
Virtual tape library commands 183