Managing Virtual Tape Libraries; Editing A Virtual Tape Library - EMC DL3D 1500 Administrator's Manual

Configuring and Managing Virtual Tape Libraries

Managing virtual tape libraries

Editing a virtual tape library

68 EMC DL3D 1500 and DL3D 3000 Administrator's Guide
You can manage the virtual tape libraries in the following ways:
To change the de-duplication mode from immediate to schedule
and vice versa, or to change the backup window for scheduled
de-duplication, see
To delete a virtual tape library, see
library" on page 69.
To place a VTL in the offline or online state, or move its media
from a slot/drive/or IE slot, or unload media, see
virtual tape library actions" on page
To view all the available virtual tape cartridges and their details
or export, recycle, delete, or import virtual media, see
media actions" on page
To view a list of SAN clients, see
on page 74.
To edit SAN client groups, see
page 75.
To delete SAN client groups, see
on page 75.
Editing an existing virtual tape library consists of changing its
de-duplication mode (immediate or scheduled), and backup window
(for scheduled de-duplication). To edit a virtual tape library:
1. Set the DL3D 1500/3000 virtual tape library to be edited to the
offline state. The section
contains more information.
2. On the Virtual Tape Libraries Configuration page, select the
virtual tape library to edit or click Edit.
The Edit Virtual Tape Library page appears.
3. Edit the virtual tape library information as desired.
4. Click Apply.
"Editing a virtual tape library" on page
"Deleting a virtual tape
70.
72.
"Managing SAN client groups"
"Editing a SAN client group" on
"Deleting a SAN client group"
"Changing the mode" on page 70
68.
"Managing
"Managing