EMC DL3D 1500 Administrator's Manual page 164

Managing Data Services
Failing back a NAS share
164 EMC DL3D 1500 and DL3D 3000 Administrator's Guide
5. Select Replication in the Data Services page.
6. Click VTL in the Target Role page to recover a virtual tape
library.
7. Select the recovered virtual tape library from the replicated
virtual tape library list and click Recover.
The virtual tape library and its cartridges are recreated on the
source system. You must add tape drives and a robot as well as
map the devices before the virtual tape library is accessible.
To fail back a NAS share:
1. On the Target Role page, click NAS.
The Target Role NAS page displays the available NAS shares that
have been replicated. The page also displays information of
failback jobs.
2. To fail back a NAS share, select the share and click Failback.
3. The system prompts you for a hostname or IP address of the
source system.
4. Type the hostname or IP address for the source system where you
want the replicated share to fail back and click Apply.
5. Open a new browser and access the remote management pages
on the Source system.
6. Select the Replication tab in the Data Services page.
7. Click NAS in the Target Role page to recover a NAS share.
8. On the source system, select the recovered NAS share from the
replicated share list and click Recover.
The NAS share is recreated on the source system.