Add Share; Del Share - EMC DL3D 1500 Administrator's Manual

add share

Description
Syntax

del share

Description
Syntax
Adds a NAS share
The add share command lets you add a NAS share. You must specify
the following NAS share settings:
NAS share name
Protocol to export (CIFS or NFS)
Enforce Read-only access (True/False)
Hide Share from Network Browsing (True/False), applicable to
the CIFS protocol only
You can also specify the description, whether or not to enable
de-duplication, whether or not to enable the backup time window for
the NAS share. If de-duplication is enabled, you must specify the
backup window start and end time.
You cannot change the de-duplication state once the NAS share is
created. The backup window will not be enabled by default, unless
specified.
syscli --add share --name <sharename> --proto {cifs|nfs} [--desc
<description>] [--ro] [--hidden] [--dedup [--startbackup <hh:mm>
--endbackup <hh:mm>]]
Deletes an existing NAS share
The del share command lets you delete a NAS share by specifying
the share name. All connections to that share are severed and all data
stored on it is removed permanently.
-syscli -del share --name <NAS share name>
Command Line Interface
NAS commands 187