add sanclientgroup
Description
Syntax
del sanclientgroup
Description
Syntax
Adds a host access group
The add sanclientgroup adds a host access group. You must specify
the group name, name of the virtual tape library, host name or name
or WWPN, target (FC port), list of device serial numbers (either VMC
or VTD) and the desired host LUNs. You must specify at least one
device and LUN.
syscli --add sanclientgroup --name <group name> --vtlname <vtl
name> --wwpn <world wide port name> --target <target> --device
<device serial number> --lun <desired LUN>
Deletes a host access group
The del sanclientgroup lets you delete a host access group. You must
specify the required virtual tape library name and the group name.
syscli --del sanclientgroup --name <vtlname> --groupname
<groupname>
Command Line Interface
Virtual tape library commands
185