Command Line Interface
OST commands
add storageserver
Description
del storageserver
Description
edit storageserver
Description
202
EMC DL3D 1500 and DL3D 3000 Administrator's Guide
This section lists the OST commands on the DL3D 1500/3000
command line interface and the syntax of these commands.
Adds a storage server
The add storageserver command lets you add a storage server to
CIFS or NFS. You must specify a number of parameters.
Syntax
syscli --add storageserver --name <server_name> --maxconnect
<connect_count> --proto {cifs|nfs} [--ro] [--hidden] [--desc
<description>] [--dedup [--startbackup <hh:mm> --endbackup
<hh:mm>]]
Deletes a storage server
The del storageserver command lets you delete a specified storage
server from CIFS or NFS. You must specify the server name.
Syntax
syscli --del storageserver --name <server_name>
Edits a storage server
The edit storageserver command lets you edit a specified storage
server. You must specify the description, start backup and end
backup times.
Syntax
syscli --edit storageserver --name <server_name> [--maxconnect
<connect_count>] [--desc <storageserver description>]
[--startbackup <hh:mm>] [--endbackup <hh:mm>]