EMC DL3D 1500 Administrator's Manual page 169

Managing Utilities
4. Click OK to return to the Utilities page.
Healthchecks
Use the Healthchecks page to configure the automatic healthcheck
function on the DL3D. When configured, the system will periodically
run a system-wide healthcheck that will determine the status of the
overall DL3D system.
General
The General page displays the overall status of all the healthchecks
as they are being run. This section allows you to run healthchecks on
demand and stop them if they are already running. When
healthchecks are run, only those healthchecks that are enabled are
executed. The progress of the healthcheck is displayed as well as the
start and completion time.
To start a Healthcheck, click Start.
To stop a Healthcheck in progress, click Stop.
Healthchecks - General
Figure 21
Status
The Status section displays a list of recently completed healthcheck
tests.The outcome of each healthcheck is displayed in this section as
well as when the healthcheck was last run and the resulting status.
Accessing utilities 169