Configuring Virtual Tape Libraries; Accessing Virtual Tape Libraries - EMC DL3D 1500 Administrator's Manual

Configuring virtual tape libraries

Accessing virtual tape libraries

To configure virtual tape libraries:
1. Access the Virtual Tape Libraries page. See
tape libraries" on page
2. Create a virtual tape library and enable immediate or scheduled
de-duplication as necessary. See
on page 60.
3. Create virtual tape cartridges on the virtual tape library. See
"Managing media actions" on page
4. Configure the SAN Client and target devices. See
SAN clients" on page 64
5. Add a SAN client group by associating the SAN Clients and
target devices with the virtual tape library. See
clients" on page 64.
To access the Virtual Tape Libraries page, from the contents frame,
click Configuration. The management frame displays the Virtual
Tape Libraries page.
The Virtual Tape Libraries page is divided into five pages:
Virtual Tape Libraries
Create Media
Media Actions
Virtual Tape Library Actions
SAN Clients
The Virtual Tape Libraries page contains a list of assigned tape
drives and all user-defined virtual tape libraries currently configured
on the system. This page allows you to add, edit, and delete virtual
tape libraries.
To access the Virtual Tape Libraries Configuration page, click
Virtual Tape Libraries located at the top of the Virtual Tape Library
page. The Virtual Tape Libraries Configuration page appears.
Configuring and Managing Virtual Tape Libraries
"Accessing virtual
59.
"Creating a virtual tape library"
72.
and "Managing targets" on page

Configuring virtual tape libraries

"Managing
65.
"Managing SAN
59