Add Media; List Media - EMC DL3D 1500 Administrator's Manual

add media

Description
Syntax
Example

list media

Description
Syntax
Output
maxcapacity = 160 GB
[mediatype = 2]
type = SDLT2
capability = RW
maxcapacity = 300 GB
[mediatype = 3]
type = DLTS4
capability = RW
maxcapacity = 800 GB
Lets you create a media
The add media command lets you create media for a specified virtual
tape library. You must create media after creating a virtual tape
library. You must specify the virtual tape library name, media type,
number of media, starting barcode, and the initial location. The initial
location can either be a slot or an I/E slot. You can also optionally
specify the media capacity. If media capacity is not specified, the
media type native capacity is considered.
syscli --add media --name <vtl name> --type <media type> --media
<number of media> --barcodestart <starting barcode> --location {slot |
ieslot} [--capacity <media capacity in GB>]
syscli --add media --name ENT-VTL1-NR --type LTO3 --media 5
--barcodestart ENR110 --location slot
Lists the barcodes from the specified virtual tape library
The list media command lists the barcodes in the system for the
specified virtual tape library. If you specify the barcode of a cartridge,
the command returns the attributes of the cartridge, if it exists. If you
specify the attrib option, the cartridge attributes will also be
displayed along with the cartridge barcode.
syscli --list media --name <vtl name> [--barcode <barcode>]
List of media:
Total count = 6
[media = 1]
Command Line Interface
Virtual tape library commands 179