Managing San Clients - EMC DL3D 1500 Administrator's Manual

Configuring and Managing Virtual Tape Libraries
Figure 8

Managing SAN clients

64 EMC DL3D 1500 and DL3D 3000 Administrator's Guide
The cartridges are available on the DL3D 1500/3000 for that
virtual tape library.
Creating media
Until you assign a virtual library to a SAN client, the backup servers
cannot use it. To ensure correct library behavior and device discovery
when assigning or unassigning, ensure that device numbering on the
bus starts with LUN 0 and no LUN numbering holes exist. LUN
numbering holes can occur when devices are unassigned.
Use the SAN Clients page to discover and add Fibre Channel SAN
clients to the available host list for the DL3D appliance.