EMC DL3D 1500 Administrator's Manual page 75

Editing a SAN client group
Deleting a SAN client group
Use the Edit page to edit a SAN client group.
To edit a SAN client group:
1. On the SAN Client Access page, click Edit. The Edit page
appears.
2. Select a virtual tape library from the Virtual Tape Library list box.
3. Select a group name from the Group Name list box.
4. Select or clear the media changer and tape drives that you must
add to the host group. The LUN assignment is displayed next to
the device.
5. Click Apply to save the changes to the SAN client group.
The SAN client group is saved.
Use the Delete page to delete a SAN client group from a virtual tape
library.
To delete a SAN client group:
1. On the SAN Client Access page, click Delete. The Delete page
appears.
2. Select a virtual tape library from the Virtual Tape Library list box.
3. Select a group name from the Group Name list box.
4. Click Delete to remove the SAN client group.
The SAN client group is removed from the virtual tape library
association.
Configuring and Managing Virtual Tape Libraries
Managing virtual tape libraries 75