Diagnostics - EMC DL3D 1500 Administrator's Manual

Managing Utilities
Disk analysis

Diagnostics

System diagnostics file
168 EMC DL3D 1500 and DL3D 3000 Administrator's Guide
When you have finished testing the network performance, disable the
Network Performance Monitor.
Disk analysis measures the hard disk performance on this system.
To perform hard disk analysis on this system:
1. Click Disk.
2. Click Start to begin the analysis.
The throughput result is displayed in KB/sec.
The DL3D appliance lets you download a system diagnostics file to
your local host, which is helpful while troubleshooting problems on
the system. You must have this file available before contacting EMC
customer support.
To download the system diagnostics file:
1. Access the Utilities page.
2. Click Diagnostics.
The diagnostics are divided into following sections:
System diagnostics file
Network performance monitor
The system diagnostics file contains the diagnostic logs for all system
components.
To generate and download a system diagnostics file:
1. On Generate/Download System Diagnostics File, click Generate
New to generate a new system diagnostics file. This can take
several minutes.
2. To download the newly generated diagnostics file, click
Download Current.
A confirmation message is displayed, asking whether to open or
save the file.
3. Select Save this file to disk, and click OK.
An Information page indicates the diagnostics file has been
downloaded.