Login Session - EMC DL3D 1500 Administrator's Manual

Configuring DL3D 1500/3000

Login session

44 EMC DL3D 1500 and DL3D 3000 Administrator's Guide
1. On the Security page, click SSL.
The management frame displays the SSL page.
Note: The default setting for SSL is
2. To enable SSL, select Enable and click Apply.
3. To add an SSL certificate, click New.
The Install SSL Certificate page appears.
4. In the Upload Your SSL certificate file edit box, type the location
and filename of the new SSL certificate file.
Note: Use the Browse button to browse the system and locate the
desired SSL certificate file. The SSL certificate file must be named
server.crt
.
5. Click Upload to install the SSL certificate file.
6. Type your private key and press Enter.
7. Type your pass phrase and press Enter. A Successful Upload
page indicates that the SSL certificate file has been installed on the
system.
8. Click OK to continue.
The certificate is displayed in the certificate area on the SSL page.
By default, the browser session will time-out after 30 minutes of
inactivity. You can shorten or extend this time from 1 to 60 minutes
using this page.
To modify the session time out value:
1. On the Login Session page, type a value for the Inactivity
Timeout field and click Apply.
2. Click OK to confirm the change in time-out value.
disabled
.