Configuring And Managing Nas Shares; Configuring Nas Shares - EMC DL3D 1500 Administrator's Manual

Configuring and managing NAS shares

Configuring NAS shares

The DL3D is designed to be a target-based, specialized, hardware
de-duplication appliance that you can configure to present an NFS
share or CIFS share to the backup server. NAS backup-to-disk (B2D)
shares can be configured as CIFS or NFS shares. Both can exist at the
same time and up to 128 total shares can exist.
Use the NAS page to configure NAS shares. To access the NAS page,
on the Disk Backup Configuration page, click NAS.
Note: Make sure the node is online before continuing with the NAS
configuration.
The NAS section is used to add, edit, or delete NAS shares. The NAS
page is divided into the following sections:
Summary Page
Add NAS Share
Edit NAS Share
Delete NAS Share
To configure NAS shares:
1. Configure a Windows domain. See
domain" on page
2. Configure access control. See
page 102.
3. Create an NFS or CIFS share on the DL3D. This share will be
mounted (or mapped) as a backup device on the backup server. If
desired, you can create multiple shares to store different
collections of save sets. See
4. Mount (or map) the share on the backup server.
• Create a mount point for the NFS share that the backup
application will use and mount the share using the commands
for your particular operating system. See
shares" on page
Configuring and Managing Disk Backup
"Configuring a Windows
98.
"Configuring access control" on
"Adding NAS shares" on page
222.
Configuring and managing NAS shares
104.
"Mounting NFS
97