List Host; Add Host; Edit Host - EMC DL3D 1500 Administrator's Manual

Command Line Interface

list host

Description

add host

Description

edit host

Description
182 EMC DL3D 1500 and DL3D 3000 Administrator's Guide
Lists all the available hosts
The list host command lists all the available hosts. The WWPN, its
alias, (if it was added by the user) and connection status of each host
are displayed. If no host alias is initially added to a host, the output
displays the alias as null.
Syntax syscli --list host
Output
host count = 1
host = 1
wwpn = 220100e08ba8338d
alias = null
connection status = active
Adds a host to the available host list
The add host command adds a host to the available host list. You
must specify the host's world wide port name (WWPN). If the host
already exists in that list of available hosts, adding the same host will
result in an error. You can add an optional host alias.
Syntax syscli --add host –wwpn <host's world wide port name> --alias <host
alias>
Adds or changes the host alias of a host
The edit host command lets you add or change the host alias of a
host. You must specify the host's WWPN.
Syntax syscli --edit host --wwpn <host's world wide port name> --alias <host
alias>