Nas Commands; List Share - EMC DL3D 1500 Administrator's Manual

Command Line Interface

NAS commands

list share

Description
186 EMC DL3D 1500 and DL3D 3000 Administrator's Guide
This section lists the NAS commands on the DL3D 1500/3000
command line interface and the syntax of these commands.
Lists all existing NAS shares and their attributes
The list share command lists all existing NAS shares on the system
and their attributes. If you specify a NAS share name, only that NAS
is listed with its attributes. The attributes include share name,
protocol, export path, de-duplication status (enabled/disabled) and
backup window status (enabled/disabled), permission, access and
description. If the backup window status is enabled, the list will also
include the start and end time of the backup window of the NAS
share.
Syntax syscli --list share [--proto cifs|nfs] | {--name <share name>} ]
Output
List of existing NAS shares:
Share name = PtNAS
Protocol = cifs
Export Path = /Q/shares/Pulla
Node = node1
Hidden = false
Dedup = Enabled
Backup Window = Disabled
Backup Window Start Time = N/A
Backup Window End Time = N/A
Permissions = rw
Access = all users
Description = Minicoy107