List Sanclientgroup - EMC DL3D 1500 Administrator's Manual

Command Line Interface

list sanclientgroup

Description
184 EMC DL3D 1500 and DL3D 3000 Administrator's Guide
type = VTD
serial = VL01SV0825BVA04501
device = 3
vtl name = MyVTL
type = VTD
serial = VL01SV0825BVA04501
Lists all the existing SAN client groups on the system
The list sanclientgroup lists the existing SAN client groups. It also
displays the virtual tape library name, group name, host, target and
devices associated with the group. If a virtual library name is
specified, this command lists only the group associated with that
virtual tape library.
Syntax syscli --list sanclientgroup [--vtlname <vtl name>]
Output
List of SAN client groups:
Total count = 1
[group = 1]
vtl name = Pulla
group name = IBMLTO3
host = 210100e08b33370b
target = 240108001bc0cf86
total device count = 3
[device = 1]
type = VMC
serial = VL01SV0904BVA11644
lun = 0
[device = 2]
type = VTD
serial = VD29SV0904BVA11644
lun = 1
[device = 3]
type = VTD
serial = VD2ASV0904BVA11644
lun = 2