EMC DL3D 1500 Administrator's Manual page 104

Configuring and Managing Disk Backup
Adding NAS shares
104 EMC DL3D 1500 and DL3D 3000 Administrator's Guide
5. Right-click the share and select Properties.
6. Select Share Permissions.
7. Select Add/Remove Share users/groups. You can enter a
user/group and then click OK.
8. Set permissions for each user.
9. Click Apply/OK.
To add NAS shares:
1. To access the NAS page, on the Disk Backup Configuration
page, click NAS.
2. Click Add to add a NAS share.
edit
Note: To a share, click the
The Add NAS Share page appears.
3. Type the NAS share information as desired
description of the fields).
Note: If you are editing a share, you can edit only the
Enforce read-only access to this share
the de-duplication policy from immediate to scheduled and vice versa, or
change the window for scheduled de-duplication.
4. Select Enable De-Duplication to enable de-duplication for this
NAS share. By default, de-duplication is not enabled. Once the
NAS share has been created, de-duplication cannot be enabled or
disabled for it.
5. If scheduled de-duplication is desired, select Enable Backup
Window and specify the backup window. De-duplication of that
data will not occur during this time duration each day. Only one
backup window may be set per share. By default, selecting
Enable De-duplication enables immediate de-duplication for the
NAS share.
a. From the list box, select the start time for the backup window.
b. From the list box, select the end time for the backup window.
share name
.
(Table 8
Description
options. You can also change
provides a
and