Command Line Interface
getstatus naslock
Description
sync vtl
Description
sync nas
Description
genrpt replication
Description
getstatus trigger
Description
200
EMC DL3D 1500 and DL3D 3000 Administrator's Guide
Lists the NAS lock status
The getstatus naslock command lists the lock status of a NAS share.
You must specify the name of the NAS share.
Syntax
syscli --getstatus naslock --name <NAS share name>
Synchronizes a virtual tape library
The sync vtl command synchronizes a virtual tape library. You must
specify the name of the virtual tape library.
Syntax
syscli --sync vtl --name <VTL name>
Synchronizes a NAS share
The sync nas command synchronizes the specified NAS share. You
must specify the name of the NAS share.
Syntax
syscli --sync nas --name <NAS share name>
Generates a replication report
The genrpt replication command generates a replication report.
Syntax
syscli --genrpt replication
Retrieves the trigger status of a source or target
The getstatus trigger command lists the trigger request status for a
source or target. You must specify either the source or the target.
Syntax
syscli --getstatus trigger --source | --target