LogicStudio
Arranging Your Signals
The display of signals can be modified directly through this control as follows:
•
You can rearrange the order of the signals shown in the waveform display area. Rolling the mouse over
the grip area on the left of a given signal shows the vertical click‐and‐drag mouse icon. When this icon
appears, you can vertically click‐and‐drag the signal to a new location.
•
You can resize the height of a given signal in the waveform display area by clicking‐and‐dragging the
bottom edge of a signal to increase/decrease its height.
•
Add a new signal to the list by pressing the Add New Signal button. With a signals selected in the
waveform display area, click the Delete Selected Signal button to remove the signal and its
configuration. Delete signals one at a time.
The Context Menu
Right‐click on the signal control side of a desired signal to show its corresponding context menu complete with
the following options:
•
Add – Inserts a new signal after the one currently selected.
•
Remove – Deletes the currently selected signal.
•
Show/Hide – Allows you to remove signals from view without deleting the configuration.
19
918291 RevA