NEC univerge SV9100 Programming Manual page 317

Issue 4.0
Item
No.
06 Internal Paging
Enable/Disable a DISA or tie trunk caller ability to use the
telephone system Internal Paging.
07 External Paging
Enable/Disable a DISA or tie trunk caller ability to use the
telephone system External Paging.
08 Direct Trunk Access
Enable/Disable a DISA or tie trunk caller ability to use Direct
Trunk Access (Service Code
09 Forced Trunk Disconnect <Not for ISDN T-point>
Enable/Disable a tie trunk caller ability to use Forced Trunk
Disconnect (Service Code 3). This option is not available to
DISA callers.
10 Call Forward Setting by Remote via DISA
Enable/Disable a DISA caller ability to use the Call Forward
service codes (Programs 11-11-01 ~ 11-11-05).
11 DISA/Tie Trunk Barge-In
Enable/Disable a DISA or tie trunk caller ability to use Barge-In.
12
Retrieve Park Hold
Enable/Disable a DISA or tie trunk caller ability to retrieve a Park
Hold call.
Conditions
None
Feature Cross Reference

Class of Service

Direct Inward System Access (DISA)

Tie Lines
SV9100 Programming Manual
Item
#
9).
Default
Input
Data
COS 1~15
0 = Off 1
1 = On
0 = Off 1
1 = On
0 = Off 0
1 = On
0 = Off 0
1 = On
0 = Off 0
1 = On
0 = Off 0
1 = On
0 = Off 1
1 = On
2-277