Sip Server Information Setup - NEC univerge SV9100 Programming Manual

Program 10 : System Configuration Setup
Level:
IN
Description
Use Program 10-29 : SIP Server Information Setup to define the SIP Proxy setup for outbound/
inbound. The 10-29 commands are not used in non-registration mode.
If entries are made in Program 10-29-xx for a SIP Server and the SIP Server is then
removed or not used, the entries in Program 10-29-xx must be set back to their default
NOTE
settings. Even if 10-29-01 is set to 0 (off), the SV9100 still checks the settings in the
remaining 10-29 programs.
Input Data
Item
Item
No.
01 Default Proxy
(Outbound)
Set whether or not
the SIP message is
always sent through
the Default Proxy.
02
Default Proxy
(Inbound)
Need to be
registered in
registration mode.
Set whether or not
the SIP message is
always received
through the Default
Proxy.
2-50

10-29 : SIP Server Information Setup

Input Data
0 = Off
1 = On
0 = Off
1 = On
Profile
Default
1~6
0
0
Program 10 : System Configuration Setup
Issue 4.0