Program 21 : Outgoing Call Setup; System Options For Outgoing Calls - NEC univerge SV9100 Programming Manual

Hide thumbs Also See for univerge SV9100:
Table of Contents

Advertisement

Level:
IN
Description
Use Program 21-01 : System Options for Outgoing Calls to set the system options for Outgoing Call
Service.
Input Data
Item
No.
01
Seizure Trunk Line Mode
Select the trunk based off the Trunk
Route Priority (0) or based off the
trunk that has not been used in the
longest time (1).
02
Intercom Interdigit Time
When placing Intercom calls, an
extension user must dial each digit in
this time.
03
Trunk Interdigit Time (External)
The system waits for this time to
expire before placing the call in a talk
state (Call Timer starts after time
expires, Voice Over and Barge-In are
not allowed until after time expires).
04
Dial Tone Detection Time
If dial tone detection is enabled, the
system waits this time for the Telco to
return dial tone. When the time
expires, the system assumes dial tone
is not present. To disable this time
(and have the system wait
continuously), enter 0.
SV9100 Programming Manual

Program 21 : Outgoing Call Setup

21-01 : System Options for Outgoing Calls

Item
Input Data
0 = Priority Route
1 = Circular Route
0~64800 (sec)
0~64800 (sec)
0~64800 (sec)
Program:
Related
Default
Program
0
14-05
14-06
10
5
14-02-08
5
14-02-05
21
2-329

Advertisement

Table of Contents
loading

Subscribe to Our Youtube Channel

Table of Contents