Sv8100 Inmail Station Mailbox Options - NEC univerge SV9100 Programming Manual

Issue 4.0
Level:
IN
Description
Use SV8100 InMail
47-02 :
mailboxes are automatically assigned as Subscriber Mailboxes. Normally, SV8100 InMail Station
Mailbox numbers 1~26 should correspond to extensions 101~126.
Input Data
Station Mailbox Number
Item
No.
01
Mailbox Type
Enable/Disable the mailbox. An extension mailbox is
not accessible when it is disabled (even though its
stored messages and configuration are retained in
memory.) If disabled, a user pressing Message
initiates a remote logon and is asked to enter their
mailbox number. A voice prompt then announces:
"That mailbox does not exist."
To make programming easier, consider associating
a mailbox number with a station port. For example,
mailbox 1 could correspond to port 1, which in turn
corresponds to extension 101.
02
Mailbox Number
Select the extension number associated with the
mailbox you are programming. Normally, mailbox 1
should use Mailbox Number 101, mailbox 2 should
use Mailbox Number 102, etc.
To make programming easier, consider associating
a mailbox number with a station port. For example,
mailbox 1 could correspond to port 1, which in turn
corresponds to extension 101.
03
Number of Messages
Set the maximum number of messages that can be
left in the Subscriber Mailbox. If a caller tries to leave
a message after this limit is reached, they hear:
"That mailbox is full." SV8100 InMail then hangs up.
SV9100 Programming Manual

47-02 : SV8100 InMail Station Mailbox Options

Station Mailbox Options
Item
Program 47 : InMail
to set up a station/extension mailbox. Station
Input Data
0 = None
1 = Personal
2 = Group
Digits (8 maximum, using
0~9)
0~99 messages
To conserve storage
space, enter 0 for all
unused mailboxes.
1~896
Default
Mailbox 1 = 1
Mailbox 2 ~ 960 = 0
Mailbox 1 = 101
Mailboxes 2~64 = 102~164
Mailboxes 65~896 = No entry
99 for mailbox 1
20 for all other mailboxes
2-577