NEC univerge SV9100 Programming Manual page 530

Item
No.
09
Extension Number or Name
Set to 1 to have the SMDR report include extension
numbers. Set to 0 to have the SMDR report include
extension names.
10
All Lines Busy (ALB) Output
Determine if the All Lines Busy (ALB) indication should
be displayed.
11
Walking Toll Restriction Table Number
12
DID Table Name Output
Determine if the DID table name should be displayed.
13 CLI Output When DID to Trunk
Determine if the CLI output should be displayed for DID.
14
Date
Determine whether or not the date should be displayed
on SMDR reports.

This option must be set to 0 if the trunk name is
set to be displayed in Program 35-02-03.
15 CLI/DID Number Switching
Determine if the CLI or DID Number Switching should be
displayed.
16 Trunk Name or Received Dialed Number
Determine how the SMDR should print incoming calls on
ANI/DNIS or DID trunks. If set to 1, ANI/DNIS trunks can
print DNIS digits. If set to 0 trunk names are printed
instead.
(With V5000 or higher, option "2" is available)
17 Print Account Code or Caller Name of Incoming Call
Determine if SMDR should print Account Code or Caller
Name of Incoming Call.
18
Print Mode for Caller Name of Incoming Call
Determine how SMDR should print Caller Name of
Incoming Call.
21
S-Point Terminal Number
22 Security Auto Dialing
23 Watch Auto Dialing
2-490
Item Input Data Default
0 = Name
1 = Number
0 = Not Displayed
1 = Displayed
0 = Not Output
1 = Output
0 = Not Displayed
1 = Displayed
0 = Not Displayed
1 = Displayed
0 = Not Displayed
1 = Displayed
0 = CLI (CLIP)
1 = DID Calling
Number
2 = CID Name
0 = Trunk Port Name
1 = Received Dialed
Number
2 = Both
0 = ACC
1 = CNAME
0 = Normal
1 = Line Feed
0 = MSN Number
1 = Extension
Number
0 = No Output
1 = Output
0 = No Output
1 = Output
Program 35 : SMDR Account Code Setup
Issue 4.0
1
0
1
0
0
0
0
0
0
0
0
0
0