Load Data - NEC univerge SV9100 Programming Manual

Issue 4.0
Level:
SA
Description
Use
Program 90-04 : Load Data
and Flash ROM in the system.
This program is available only via telephone programming and not through PC
Programming.
NOTE
Item
Item
No.
01

Load Data

Conditions
After uploading the programming, reset the system and wait a few minutes for the system to reset

completely before accessing any line or special system feature. Otherwise, some unusual LED
indications may be experienced.
Feature Cross Reference
None
SV9100 Programming Manual
Program 90 : Maintenance Program
to load the system data from the inserted USB Flash Drive to the SRAM
Input Data
Dial 1+ press Transfer (Press Transfer to cancel)
90-04 : Load Data
2-817