Isdn Options - NEC univerge SV9100 Programming Manual

Level:
IN
Description
Use Program 20-25 : ISDN Options to define the ISDN system options.
Input Data
Item
No.
01
Send the Release Message After Subscriber Hangs
Up
02
Progress Indicate Information Element Detect
03 Bearer Capability Select from SLT Outgoing
04 Send DT until user dials first digit (Local Dial Tone)
With Overlap Sending Mode, if the network side stops
dial tone when CLI is included in the SETUP message,
the system sends dial tone until the user dials the first
digit instead of the network.
05 T305 Timer Start After Sending Disconnect
Message
06 Call Proceeding Send Mode
07
Local Busy Tone Mode Set When Disconnect
Message Received
08 Use of Lower Layer Compatibility (LLC)
This Program must be set to 0 for International Dialing
when using Calling Number Presentation (CPN) from
station.
09
High Layer Compatibility (HLC) Sending
10
S-Point Terminal Seizes Analog Trunk
11 Automatic Changing System Clock When Date/
Time Information Element Received
2-292
Program 20 : System Option Setup
Item

20-25 : ISDN Options

Input Data
0 = Off
1 = On
0 = Off
1 = On
0 = 3.1KHz Audio
1 = Speech
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Local Busy Tone Off
1 = Busy Tone from NT
(network side)
0 = Disable (Off)
1 = Enable (On)
0 = Disable (Off)
1 = Enable (On)
0 = Disable (Off)
1 = Enable (On)
0 = Disable (Off)
1 = Enable (On)
Program 20 : System Option Setup
Issue 4.0
Default
1
1
0
0
1
1
0
0
0
1
0