Call Forward Split Settings - NEC univerge SV9100 Programming Manual

Level:
IN
Description
Use Program 24-09 : Call Forward Split Settings to assign Call Forwarding Type and the destination
number for each extension/virtual extension. The destination can have up to 24 digits, using 0~9,
and P (P is a pause used for analog trunks). Be sure to include the trunk access code (e.g., 9) in the
number if the destination is off-premise.
A pause for analog trunks can be assigned by pressing Line Key 1.
NOTE
Input Data
Extension Number
Item
No.
01 Call Forwarding Type:
0 = Call Forwarding Off
1 = Call Forwarding with both ring
2 = Call Forwarding when no answer
3 = Call Forwarding all calls
4 = Call Forwarding busy or no answer
5 = Call Forwarding when busy
02 CO Call Forwarding Destination for Both Ring, All Call, No Answer:
0~9, #, , R, and P

(Up to 24 digits)
03
Intercom Call Forwarding Destination for Both ring, All Call, No Answer:
0~9, #, , R, and P

(Up to 24 digits)
04 CO Call Forwarding Busy Destination:
0~9, #, , R, and P

(Up to 24 digits)
05 Intercom Call Forwarding Busy Destination:
0~9, #, , R, and P

(Up to 24 digits)
2-400
Program 24 : Hold/Transfer Setup

24-09 : Call Forward Split Settings

Input Data
001 ~ 960
Default
0
No
Setting
No
Setting
No
Setting
No
Setting
Program 24 : Hold/Transfer Setup
Issue 4.0
, #,
