Program 32 : Door Box And Sensor Setup; Door Box Timers Setup - NEC univerge SV9100 Programming Manual

Program 32 : Door Box and Sensor Setup

Level:
IN
Description
Use Program 32-01 : Door Box Timers Setup to assign the timers used for the Door Box.
The Door Box feature is called Door Phone when programming via WebPro and using a
multiline terminal.
NOTE
Input Data
Item
No.
01 Door Box Answer Time
A multiline terminal user must answer Door Box chimes
during this time.
02
Door Lock Cancel Time
When a single line (2500 type) telephone user hook
flashes or a multiline terminal user presses the Recall key
while talking to a Door Box, the strike stays open for this
time.
03 Off-Premise Call Forward by Door Box Disconnect
Timer
Define the conversation period for an Off-Premise Call
Forward by Door Box call. When this timer expires, the
caller hears busy tone for three seconds (fixed time), and
the call is then disconnected.
Conditions
None
Feature Cross Reference

Door Box
SV9100 Programming Manual

32-01 : Door Box Timers Setup

Item
Program:
Input Data Default
0~64800 30
(sec)
0~64800 10
(sec)
0~64800 60
(sec)
32
2-467