NEC univerge SV9100 Programming Manual page 228

Item
Item
No.
11
Callback Automatic Answer
Enable/Disable automatic answer
of calls recalling to a station. For
example, if a Transfer Recall or
Hold Recall is ringing back to a
station, the following happens:
If PRG 15-02-11 is enabled, the
station automatically answers the
recall when it goes off-hook.
If PRG 15-02-11 is disabled, a
station does not automatically
answer the recall when it goes off-
hook. The user must first press the
line appearance of the recalling call
or press the answer key.
12 Off-Hook Ringing
Set the telephone Off-Hook
signaling. Off-hook signaling
occurs when a telephone user
receives a second call while busy
on a handset call. To enable/
disable Off-Hook Signaling for an
extension Class of Service, use
Program 20-13-06.
13 Outgoing Caller List Mode
Select whether the Redial List
feature should store internal and
external numbers (0), or only
external numbers (1).
15
Storage of Caller ID for answered
call
16
Line Load Control Restriction
Enable/Disable an extension user
ability to make and receive calls
when the Line Load Control feature
is triggered.
Warning: When enabled, users
cannot make or receive internal
and external calls including 911
calls if the Line Load Control
feature is enabled and triggered..
18
Power-Saving Mode
2-188
Input Data
0 = Off
1 = On
0 = Muted Off-Hook Ringing
1 = No Off-Hook Ringing
2 = Not Used
3 = Beep in Speaker (SP)
4 = Beep in Handset (HS)
5 = Speaker & Handset Beep
0 = ICM/Trunk (Extension/Trunk Mode)
1 = Trunk Mode
0 = Disable (Off)
1 = Enable (On)
0 = Disable (Not Restricted)
1 = Enable (Restricted)
0 = Normal mode
1 = Power-Saving Mode (Eco-Mode)
Default
1
5
1
1
0
1
Program 15 : Extension, Basic Setup
Issue 4.0
Related
Program
20-02-10