NEC univerge SV9100 Programming Manual page 805

Issue 4.0
Input Data (Continued)
Item
No.
72
Jitter Buffer Mode for Video
This program is not supported for
version 1.00 software and will be
supported in a later release.
This program sets the jitter buffer
size adjustment. At default this is
set to self adjusting and should only
be changed when directed by
support.
73
Minimum Jitter Buffer for Video
This program is not supported for
version 1.00 software and will be
supported in a later release.
This program sets the minimum
value of jitter buffer for the video
stream.
This value must be smaller than the
value of the maximum jitter buffer.
This value should only be changed
for if needed for highly congested
networks.
74 Initial Jitter Buffer for Video
This program is not supported for
version 1.00 software and will be
supported in a later release.
This program sets the initial value of
jitter buffer for the video stream.
This value must be smaller than the
value of the maximum jitter buffer
and bigger than the value of the
minimum jitter buffer.
This value should only be changed
for if needed for highly congested
networks.
SV9100 Programming Manual
Item
1 = Static
2 = Self Adjusting
0 ~ 1000ms
0 ~ 1000ms
Input Data Default
70ms
140ms
Profile
1~6
2
2-765