In-Dhcp Server Setup - NEC univerge SV9100 Programming Manual

Program 10 : System Configuration Setup
Level:
SA
Description
Use Program 10-13 : In-DHCP Server Setup to setup the DHCP Server built into the GCD-CP10 blade.
Input Data
Item
Item
No.
01
DHCP Server
Mode
02
Lease Time
05 Last DHCP Data
Conditions
None
Feature Cross Reference

Voice Over Internet Protocol (VoIP)
2-28
Input Data Default
0 = Disable
1 = Enable
Days 0~255
Hour 0~23 0 hour
Minutes 1~59 30 minutes
0 = Disable
1 = Enable

10-13 : In-DHCP Server Setup

Description
0
Enable/Disable the built-in DHCP
Server.
0 day
Lease Time of the IP address to a
client.
Press the Transfer Key

to increment to the next
setting data.
1 If 10-13-01 is enabled, this setting
determines if DHCP resource is
enabled or disabled.
When enabled, the system does
not update DHCP (Option 54
DHCP Server info) if 10-12-09 IP
Address is changed.
Program 10 : System Configuration Setup
Issue 4.0