NEC univerge SV9100 Programming Manual page 451

Issue 4.0
Input Data (Continued)
Item
No.
07
Long Conversation Warning Tone Time
Determine the time a DISA caller or any trunk-to-trunk
(such as Tandem Trunking) conversation can talk before
the Long Conversation tone is heard.
08 Long Conversation Disconnect Time
Determine the time the system waits before
disconnecting a DISA caller or any trunk-to-trunk (such
as Tandem Trunking) conversation call after the Long
Conversation tone is heard.
09
DISA Internal Paging Time
Enter the maximum length of an Internal Page placed by
a DISA caller. If the Page continues longer than this
time, the system terminates the DISA call.
10
DISA External Paging Time
Enter the maximum length of an External Page placed
by a DISA caller. If the Page continues longer than this
time, the system terminates the DISA call.
11
VRS/DISA Answer Delay Time
Set up the time the system waits after receiving an
incoming VRS/DISA call before the system automatically
answers the call.
13 VRS/DISA Busy Tone Interval
If a DISA caller dials a busy extension (and Program
25-04 = 0), the system plays busy tone for this time
before disconnecting.
14 Delayed VRS Answer Time
Assign the delay time from switching from a normal
incoming status to DID mode. If this time is set to 0, the
call switches to DID mode immediately.
Conditions
None
Feature Cross Reference

Direct Inward System Access (DISA)
SV9100 Programming Manual
Item
Input Related
Default
Data Program
0~64800 3600 14-01-25
20-28-01
(sec)
20-28-02
20-28-03
0~64800 10 14-01-25
20-28-01
(sec)
20-28-02
20-28-03
0~64800 30
(sec)
0~64800 30
(sec)
0
0~64800
(sec)
0~64800 5
(sec)
0~64800 10
(sec)
2-411