NEC univerge SV9100 Programming Manual page 303

Issue 4.0
Item
No.
05 Signal/Voice Call
Turn off or on an extension user ability to
enable Handsfree Answerback or Forced
Intercom Ringing for their incoming Intercom
calls.
06
Incoming Time Display
07
Call Queuing
Turn off or on an extension user ability to have
calls queued if a call rings the extension when
it is busy.
08
Calling Party Information
Turn off or on an extension ability to display
calling party information on CCIS calls.
10
--- Not Used ---
11
--- Not Used ---
13 DND Active While Ringing
When set to 0, and if set DND during an
incoming call, the call for the terminal stops
immediately. When set to 1, and if set DND
during an incoming call, the call for the terminal
continues ringing and is set for the next call.
Conditions
None
Feature Cross Reference

Class of Service
SV9100 Programming Manual
Item
Default
Input
Data COS COS
01~14
0 = Off 1
1 = On
0 = Off 0
1 = On
0 = Off 1
1 = On
0 = Off 1
1 = On
0 = 0
Immediate
1 =
Next Call
Related
Program
15
1 11-11-15,
11-11-16
0
1 20-13-06
1 50-02-05
0
2-263