Smdr Output Options - NEC univerge SV9100 Programming Manual

Issue 4.0
Level:
IN
Description
Use Program 35-02 : SMDR Output Options to set the SMDR (Station Message Detail Recording)
output options. Refer to the following chart for a description of each option, its range and default setting.
Item
No.
01 Toll Restricted Call
SMDR can include or exclude calls blocked by Toll
Restriction.
02 PBX Calls
When the system is behind a PBX, SMDR can include all
calls (1), or just calls dialed using the PBX trunk access
code (0).
03 Trunk Number or Name
Select whether the system should display the trunk
number or the name on SMDR reports.
 If this option is set to 1, Program 35-02-14
must be set to 0.
04 Summary (Daily)
Set to 1 to have the SMDR report provide a daily
summary (at midnight every night).
05 Summary (Weekly)
Set to 1 to have the SMDR report provide a weekly
summary (every Saturday at midnight).
06
Summary (Monthly)
Set to 1 to have the SMDR report provide a monthly
summary (at midnight on the last day of the month).
07
Toll Charge Cost
Set to 1 to have the SMDR report include toll charges.
08 Incoming Call
Enable this option (1) to have the SMDR report include
incoming calls. If you disable this option (0), incoming
calls do not print.
SV9100 Programming Manual
Program 35 : SMDR Account Code Setup
Item

35-02 : SMDR Output Options

Input Data
0 = Not Displayed
1 = Displayed
0 = Not Displayed
1 = Displayed
0 = Name
1 = Number
0 = Not Displayed
1 = Displayed
0 = Not Displayed
1 = Displayed
0 = Not Displayed
1 = Displayed
0 = Not Displayed
1 = Displayed
0 = Not Displayed
1 = Displayed
Default
1
1
1
1
1
1
1
1
2-489