NEC univerge SV9100 Programming Manual page 625

Issue 4.0
Input Data (Continued)
Item
No.
04
Message Retention
Determine how long a Subscriber Mailbox retains
held and saved messages. If a message is left in a
Subscriber Mailbox longer than this interval,
VM8000 InMail deletes it.
05 Recording Conversation Beep
(Rec Conv Beep)
Enable/Disable the Conversation Record beep. If
enabled, all parties on a call hear the voice prompt
"Recording", followed by a single beep when the
extension user initiates Conversation Record. If
disabled, the voice prompt and beep do not occur.
When you disable the Conversation Record beep,
the following voice prompts do not occur while
SV8100 InMail records the conversation:
Recording
(followed by a beep)
That mailbox is full
(if the mailbox message storage capacity is
reached)
You have reached the recording limit
(if the recorded message is too long)
The UNIVERGE SV9100 telephone system
software provides an additional Conversation
Record beep. This beep repeats according to the
setting of Program 45-01-06: Voice Mail Integration
Options: Record Alert Tone Interval Time (0~64800
seconds). To disable the UNIVERGE SV9100
telephone system Conversation Record beep,
enter 0 for this option.
06
Message Waiting Lamp
(Update MW Lamp)
Enable/Disable Message Waiting light at the
extension associated with the Subscriber mailbox.
For Subscriber Mailboxes, enable this option. For
Guest Mailboxes, disable this option.
07
Auto Attendant Direct to VoiceMail
Enable/Disable Auto Attendant Direct to VM. When
a subscriber enables Auto Attendant Direct to VM,
an Automated Attendant caller routes directly to the
mailbox, hears the greeting, and is asked to leave a
message. A subscriber also can enable Auto
Attendant Direct to VM while recording their
mailbox greeting.
SV9100 Programming Manual
Item Input Data
1~99 days
0 (Indefinite)
0 = No (Disable)
1 = Yes (Enable)
0 = No (Disable)
1 = Yes (Enable)
0 = No (Disable)
1 = Yes (Enable)
Default
0
1
1
0
2-585