System Reset - NEC univerge SV9100 Programming Manual

Level:
IN
Description
Use Program 90-08 : System Reset to perform a system reset.
This program is available only via telephone programming and not through PC
Programming.
NOTE
Input Data
Item
Item
No.
01

System Reset

Conditions
After restoring a customer database, the system must be reset using Program 90-08 or by powering down/
powering up before all the restored programming takes affect.
Feature Cross Reference
None
2-822
Program 90 : Maintenance Program
Input Data
Dial 1 + press Transfer (Press Transfer key to cancel)
90-08 : System Reset
Program 90 : Maintenance Program
Issue 4.0