NEC univerge SV9100 Programming Manual page 333

Issue 4.0
Input Data (Continued)
Item
No.
12 Call Forward Options (Auto Connect Send)
Incoming Calls Forwarded Out Automatically Return
Connect Message When Outgoing Call Receives
Alerting Message.
13 Local Busy Tone (Release)
Busy tone send when T-point receiving a RELEASE
message from Network.
14
No Response Release Send
Operation mode setting for when second T303 timer
expires.
15 Call Reference Selection for PRI 2B-Channel
Transfer
This PRG is used to turn on or off the ability for an
incoming call to be transferred (Trunk-to-Trunk) to an
outgoing call when 2 B-Channel Transfer is used.
20 Send Sending Complete Information
Conditions
None
Feature Cross Reference

ISDN Compatibility
SV9100 Programming Manual
Item Input Data
0 = Normal – No
Message (Off)
1 = Normal – No
Message (On)
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = No Send
1 = Send
Default
0
0
0
0
0
2-293