Programmable One-Touch Keys - NEC univerge SV9100 Programming Manual

Level:
IN
Description
Use Program 15-14 : Programmable One-Touch Keys to define the One-Touch key data for each
multiline terminal.
For each UNIVERGE SV9100 Wireless telephone to use the Transfer When Out of Range feature, enter
the destination number (up to 24 digits) and name (up to 12 characters) into One-Touch bin 10. Make
sure to add any required trunk access codes for outside numbers. If this bin information is changed
either through 15-14-01 or through user programming, the destination for the transferred calls is also
changed.
Input Data
Extension Number
Key Number
Item
No.
01 1~0, ,

@ (Code for Answer-Wait)
Up to 24 digits
02
Default
No entries for any extension.
Conditions
None
Feature Cross Reference

One-Touch Keys
2-224
Program 15 : Extension, Basic Setup

15-14 : Programmable One-Touch Keys

Dial Data
# , Pause, Hookflash,
Name
001 ~ 960
01~10
Name
Up to 24 Digits No Setting
Up to 12 Digits No Setting
Default
Program 15 : Extension, Basic Setup
Issue 4.0