Automatic Trunk-To-Trunk Transfer Target Setup - NEC univerge SV9100 Programming Manual

24-04 : Automatic Trunk-to-Trunk Transfer Target Setup

Level:
IN
Description
Use Program 24-04 : Automatic Trunk-to-Trunk Transfer Target Setup to assign the Speed Dialing
number bin which should be used as the destination of the Automatic Trunk-to-Trunk Transfer.
Input Data
Trunk Port Number
Day/ Speed Dial
Item
Night
No.
Mode
01 1~8
Conditions
None
Feature Cross Reference

Call Forwarding, Off-Premise
2-398
Program 24 : Hold/Transfer Setup
Area Default
Number
0~9999 9999 The destination telephone number of the
Trunk-to-Trunk Transfer uses the number
registered into the Speed Dial. Use this
program to setup the Speed Dial Bin
Number.
001~400
Description
Program 24 : Hold/Transfer Setup
Issue 4.0
Related
Program
11-10-08
13-04
24-05