Dt800/Dt700 Server Information Setup - NEC univerge SV9100 Programming Manual

Program 10 : System Configuration Setup
Level:
IN
Description
Use Program 10-46 : DT800/DT700 Server Information Setup to setup the information of SIP Multiline
(DT700 series) Server.
Input Data
Item
No.
01 Register Mode
Normal:
When the phone boots up, it
reports the ext. assigned in the
phone or chooses the next
available extension in the system.
Password is not required.
Auto:
If set to Auto, the SIP user name
and password must be entered on
the actual IP phone. These
settings must match 84-22/
15-05-27, or the phone does not
come on-line.
Manual:
When the phone boots up, it
prompts user to enter a user ID
and password before logging in. If
the user name and password are
programmed in the SIP User
settings in the telephone, it comes
up without prompting the user. It
checks this user ID/password
against 84-22/15-05-27. If there is
no match, the phone does not
come on-line.
04
Server Name
Assign the Server name to be
used in the SIP URL.
2-64

10-46 : DT800/DT700 Server Information Setup

Item Input Data
0 = Normal
1 = Auto
2 = Manual
Up to 32 characters
Related
Default
Program
0
sipphd
Program 10 : System Configuration Setup
Issue 4.0