NEC univerge SV9100 Programming Manual page 496

Table 2-11 Keys for Entering Names (Continued)
When entering names in the procedures below, refer to this chart. Names can have up
Use this keypad
digit . . .
#
Conf
Hold
Input Data
Item
No.
01 All Call Paging Zone Name
Assign a name to each All Call Internal Paging zone.
The name shows on the display of the telephone
making the announcement.
02 Page Announcement Duration
Set the maximum time for Page announcements.
(Affects External Paging only)
04 Privacy Release Time
Once the user initiates a Meet-Me Conference or
Voice Call Conference, the system waits this time for
the Paged party to join the call.
Conditions
None
Feature Cross Reference

Paging, External

Paging, Internal
2-456
Key for Entering Names (Continued)
to 12 digits.
When you want to. . .
# = Accepts an entry (only required if two letters on the same key are
needed - ex: TOM). Pressing
programming mode, use the right arrow soft key instead to accept
and/or add a space.)
Clear the character entry one character at a time.
Clear all the entries from the point of the flashing cursor and to the
right.
Item
# again = Space. (In system
Input Data
Up to 12 Characters
0~64800 (sec)
0~64800 (sec)
Issue 4.0
Related
Default
Program
Group All 11-12-19
31-02-02
1200
90
Program 31 : Paging Setup