Copy Program By Port Number - NEC univerge SV9100 Programming Manual

Level:
IN
Description
Use Program 92-03 : Copy Program by Port Number to copy extension and the data of each outside
line.
This program is available only via telephone programming and not through PC
Programming.
NOTE
Input Data
Item
No.
01 Source Number
02 Destination Number (From)
03 Destination Number (To)
Conditions
None
Feature Cross Reference
None
2-896
Program 92 : Copy Program

92-03 : Copy Program by Port Number

Item
Enter the port number from where the data is to be copied.
Enter the first port number where the information is to be
copied.
Enter the last port number where the information is to be
copied. If the information is to be copied only to one port,
enter the information entered in the Destination Number
(From) entry.
Input Data
Program 92 : Copy Program
Issue 4.0