Registration Of Standard Sip Terminal - NEC univerge SV9100 Programming Manual

Level:
IN
Description
Use Program 15-24 : Registration of Standard SIP Terminal to register data in the standard SIP
terminal where Register is not used.
Input Data
Extension Number
Input Data
Item
No.
01 Using IP Address
IP Address of the standard SIP
terminal that is used as the SIP
extension. When Program 15-24-03 is
set to 1, this Program cannot be
changed from 0.0.0.0 (except using
PCProgramming).
02 Call Procedure Port
Call procedure port of the standard
SIP terminal that is used as SIP
extension.
03 Registration Setting when
REGISTER isn't used
Enables or disables the Registration
method. An error will occur if Program
15-24-01 is 0.0.0.0 and this Program
is set to 1 (except using
PCProgramming).
04 Transport Protocol
This program sets the transport
protocol for selected SIP terminal
without registration method.
2-234
Program 15 : Extension, Basic Setup

15-24 : Registration of Standard SIP Terminal

Item
0.0.0.0~255.255.255.255
0~65535
0 = Disable
1 = Enable
0 = UDP
1 = TCP
001 ~ 960
Input Data
Program 15 : Extension, Basic Setup
Issue 4.0
Default
0.0.0.0
5060
0
0