NEC univerge SV9100 Programming Manual page 806

Input Data (Continued)
Item
No.
75 Maximum Jitter Buffer for Video
This program is not supported for
version 1.00 software and will be
supported in a later release.
This program sets the maximum
value of jitter buffer for the video
stream.
It is used only when 84-19-72 (Jitter
Buffer Mode for video) is set to 1:
Fixed.
This value must be bigger than the
value of the minimum jitter buffer
and should only be changed if
needed for highly congested
networks.
Conditions
None
Feature Cross Reference
None
2-766
Item
0 ~ 1000ms
Input Data Default
210ms
Program 84 : Hardware Setup for VoIP
Issue 4.0
Profile
1~6