Service Code Setup (For Service Access) - NEC univerge SV9100 Programming Manual

Level:
IN
Description
Use Program 11-12 : Service Code Setup (for Service Access) to customize the Service Codes
which are used for service access. You can customize additional Service Codes in Programs 11-10, 11-
11, and 11-13 through 11-16.
The following chart shows:
The number of each code (01~59).

The function of the Service Code.

The type of telephones that can use the Service Code.

The default entry. For example, dialing 770 (Item 05) cancels a previously set Camp-On.

Programs that may be affected with the changing the code.

Input Data
Item
No.
01 Bypass Call
Activate Call Forwarding/Do Not Disturb Override.
This code is available only if you disable the voice
mail Single Digit dialing code in Program 11-16-09.
02 Conference
03 Override (Off-Hook Signaling)
04 Set Camp-On
05
Cancel Camp-On
06 Switching of Voice Call and Signal Call
07 Step Call
08 Barge-In
09
Change to STG (Department Group) All Ring
10 Station Speed Dialing
2-120
Program 11 : System Numbering

11-12 : Service Code Setup (for Service Access)

Item
Defaul
Terminals
t
MLT, SLT 707
# 1
MLT, SLT
MLT, SLT 709
MLT, SLT 750
MLT, SLT 770
MLT, SLT 712
MLT, SLT 708
MLT, SLT 710
MLT, SLT No
Setting
# 2
MLT, SLT
Program 11 : System Numbering
Issue 4.0
Related
Program
11-16-09
16-02