NEC univerge SV9100 Programming Manual page 230

Item
Item
No.
26
MSG Key Operation Mode
Determine whether an extension
MSG key should function as a
Message key or Voice Mail key. If
set as a Message key, users can
press the key to call the voice mail
only when they have new
messages.
27 Handset Volume
Determine how an extension
handset volume is set after it is
adjusted during a call.
When 1 is assigned in this

program and a user sets the
volume to maximum, the volume is
reset to a level to meet FCC
standards when the user hangs
up.
28 Message Waiting Lamp Color
Determine whether an extension
Message Waiting Lamp lights
Green or Red when a message is
received.
29
PB Back Tone Level
Allow adjustment of the PB Back
Tone Level when you are calling an
ISDN Line.
30
Toll Restriction Class
Select the Toll Restriction Class to
use when placing a call from a
virtual extension.
34 Call Register Mode
The Caller ID Scroll stores Trunk
calls only (0), or both Internal and
Trunk calls (1).
35 Message Waiting Lamp Cycle for
Calling Extension
Select the cycle method that the
Large LED flashes when the
extension has set Message
Waiting.
2-190
Input Data
0 = Message Key
1 = Voice Mail Key
0 = Back to Default (Back)
1 = Stay at previous level (Stay)
0 = Green
1 = Red
1~57 (-15.5dB ~ +12.5dB)
0 = Vir. Ext. (Virtual Extension Class)
1 = Real Ext. (Real Extension Class)
0 = Trunk Mode
1 = Extension/Trunk Mode
1 = Cycle 1
2 = Cycle 2
3 = Cycle 3
4 = Cycle 4
5 = Cycle 5
6 = Cycle 6
7 = Cycle 7
Default
0
1
1
32
(0dB)
1
0
7
Program 15 : Extension, Basic Setup
Issue 4.0
Related
Program
15-02-35
15-02-36
15-02-37
15-02-38
15-02-28
15-02-36
15-02-37
15-02-38