Extension Data Swap - NEC univerge SV9100 Programming Manual

Issue 4.0
Level:
IN
Description
Use Program 92-04 : Extension Data Swap to swap data between two extensions.
This program is available only via telephone programming and not through PC
Programming.
NOTE
Input Data
Item
No.
01 1st Extension Number
02
2nd Extension Number
The following table lists Programs that use the Extension Data Swap function.
Program
Number
11-02 Extension Numbering
12-05 Night Mode Group Assignment for Extensions
13-03 Abbreviated Dial Group Assignment for Extensions
13-06 Station Abbreviated Dial Number and Name
15-01 Extension Basic Data Setup
15-02 Multi-Line Telephone Basic Data Setup
15-03 Single Line Telephone Basic Data Setup
15-06 Trunk Access Map for Extension
15-07 Programmable Function Key
15-08 Incoming Virtual Extension Ring Tone Setup
15-09 Virtual Extension Ring Assignment
15-10 Incoming Virtual Extension Ring Tone Order Setup
SV9100 Programming Manual
Program 92 : Copy Program
Item
Program Name

92-04 : Extension Data Swap

Input Data
Up to eight characters.
2-897